Reticulated (open pore) Yellow Safety Foam for use with Petrol
Specification: • For in-tank use with petrol • Reduces fuel slosh • Suppresses explosion (fuel cell must be at least 80% foam-filled) • Sold in 27 Litre cubic foot blocks (300x300x300mm) • Reduces fuel cell capacity by up to 5% (3% displacement, 2% 'clingage') Baffle foam can be supplied in custom shapes and quantities. Please contact the ATL Sales Team for further information. Technical data: • Primary Uses – Petrol, Race Fuels, Oil, Kerosene, Avgas, JP Fuels • Colour – Yellow • Specification – MIL-B-83054 • Polyol Type – Polyester • Density Range (lb/ft^3) – 1.20 to 1.45 • Porosity, pore size (ppi) – 8 to 18 • Air Pressure Drop (in. of water) – 0.140 to 0.230 • Tensile Strength (psi) Min – 15 • Tensile Strength at 200% Elongation (psi) Min – 10 • Ultimate Elongation (%) Min – 220 • Tear Resistance (lb/In) Min – 5 • Constant Deflection Compression Set (%) Max – 35 Compression Load Deflection at: • 25% Deflection (psi) Min – 0.3 • 65% Deflection (psi) – 0.5 • Fuel Displacement/ Max Vol % – 2.5 • Fuel Retention (Max Vol %) – 2.5 • Flammability (in/min) Max – 15 • Extractable Materials (Wt %) Max – 3 • Entrained Solid Contamination (mg/ft^3) Max – 11 • Typical Electrical Resistivity (OHM-CM) – 8x10^13
ATL has a network of trusted agents across Europe and beyond. Our agents can supply parts from stock or help you with your custom fuel cell and equipment requirements.