|
Manufactured from ATL's unique ATL565 material, supplied fully foam baffled with 1 x 6” x 10” top plate, 2 x -6 fuel pickups, 1 x -6 rollover vent valve, Ø 21/4” non-return filler neck with integral valve. (Note: SA105 is fitted with 4” x 6” top plate, 1 x -6 fuel pick up and filter, 1 x -6 rollover vent and 1 x Ø 21/4” filler neck with safety valve and cap. FIA/FT3-1999 approved.
| 1 |
SAVER CELLS |
| Capacity |
Length |
Width |
Height |
Part No |
Alloy Box |
Repl. Baffle Foam |
| 20L |
330mm |
330mm |
230mm |
SA105 |
AL105 |
BF605 |
| 30L |
505mm |
305mm |
224mm |
SA108 |
AL108 |
BF608 |
| 40L |
602mm |
314mm |
254mm |
SA110 |
AL110 |
BF610 |
| 45L |
502mm |
437mm |
234mm |
SA112 |
AL112 |
BF612 |
| 60L |
602mm |
437mm |
234mm |
SA115 |
AL115 |
BF615 |
| 80L |
640mm |
640mm |
210mm |
SA122A |
AL122A |
BF622A |
| 80L |
620mm |
415mm |
338mm |
SA122B |
AL122B |
BF622B |
| 80L |
843mm |
435mm |
235mm |
SA122C |
AL122C |
BF622C |
| 100L |
740mm |
425mm |
350mm |
SA126A |
AL126A |
BF126A |
| 100L |
635mm |
430mm |
430mm |
SA126C |
AL126C |
BF126C |
| 120L |
640mm |
640mm |
338mm |
SA132A |
AL132A |
BF632A |
| 120L |
641mm |
465mm |
420mm |
SA132B |
AL132B |
BF632B |
| 120L |
845mm |
437mm |
361mm |
SA132C |
AL132C |
BF632C |
| 120L |
620mm |
416mm |
535mm |
SA132D |
AL132D |
BF632D |
| 170L |
640mm |
640mm |
425mm |
SA144 |
AL144 |
BF644 |
| 2 |
SAVER CELL TOP PLATE |
| Saver Cell top plate fitted with Ø 21/4” filler neck, 1/4 turn cap, 2 x -6 outlets, 1x -6 return, 1 x -6 roll over vent valve and level gauge. (please advise tank depth upon ordering) |
(TF641) |
| Please note, Saver Cell use with injected engines requires the fitting of an ATL collector or swirl pot. Contact the ATL technical sales department for information on the Saver Cell Injector Conversion Kits (ICK) for injected engines. |
|
|
